Concrete Costs in Tennessee: 2026 Price Guide

Concrete Costs in Tennessee: What to Expect in 2026

Ready-mix concrete in Tennessee typically costs between $113–$144 per cubic yard delivered, which is about 13% below the national average. That range reflects the South region's labor market and the cost of aggregates, cement, and diesel for delivery trucks.

For smaller projects, bagged concrete from home improvement stores runs $6–$9 per 80 lb bag, yielding about 0.60 cubic feet. It's economical for jobs under 0.5 cubic yards; above that, ready-mix becomes more cost-effective and saves significant mixing labor.

Typical Project Costs in Tennessee

Concrete driveway (2-car, 16×30 ft, 4 inches thick): $3,306–$4,785 installed
Patio slab (12×16 ft, 4 inches thick): $1,305–$2,088 installed
Foundation footing (per linear foot): $16–$24 installed
Concrete steps (4-step entry): $783–$1,305 installed

What Drives Concrete Prices in Tennessee?

Tennessee's humid subtropical climate affects concrete work in specific ways. In peak summer heat, concrete can set too quickly, requiring accelerated pouring and finishing. Early morning pours and shading are common — work scheduled for spring and fall typically costs less.

Other factors include:

Aggregate availability: South region aggregate supply affects base material costs.
Labor rates: Tennessee construction labor is about 13% below the national average, which directly affects installed costs.
Delivery minimums: Most Tennessee ready-mix plants have a 1-yard minimum and charge short-load fees for deliveries under 5–7 yards.
Site accessibility: Narrow access, pump truck requirements, or long chute runs add $131–$348 per pour.

Permits for Concrete Work in Tennessee

Most structural concrete (foundations, driveways over a certain size, retaining walls) requires a permit from your local Tennessee municipality. Permit fees typically run $65–$218 for residential projects. Always check with your local building department before pouring — unpermitted work can require costly removal or create complications when selling.

How to Save on Concrete in Tennessee

Get at least three quotes from local ready-mix suppliers and concrete contractors. Ask about scheduling flexibility — filling a partially empty truck (combining orders with neighbors or the contractor's other jobs) can reduce short-load fees significantly. For decorative work, compare plain concrete + sealer against stamped or exposed aggregate, which can cost 2–4× more but adds significant curb appeal and resale value.

Frequently Asked Questions

How much is a yard of concrete in Tennessee?

Ready-mix concrete in Tennessee costs approximately $113–$144 per cubic yard for standard 3,000–4,000 PSI mix. High-strength mixes (5,000+ PSI) run $135–$174/yard. Short-load fees apply for orders under 5–7 yards.

What is the best time of year to pour concrete in Tennessee?

In Tennessee's humid subtropical climate, spring and fall offer the most favorable temperatures for concrete curing, avoiding summer heat that accelerates set time and winter freeze-thaw cycles.

Do I need a permit to pour a concrete driveway in Tennessee?

Most Tennessee municipalities require a permit for driveways, patios, or any structural concrete. Requirements vary by county and city — contact your local building department or check their website before starting. Permit costs are typically $75–$250 for residential projects.

How many bags of concrete do I need for a 10×10 slab?

A 10×10 ft slab at 4 inches thick requires approximately 1.23 cubic yards. That's about 56 bags of 80 lb ready-mix, which is at the edge where ready-mix delivery starts to become more economical than bagged. Use our concrete calculator to get exact bag counts for any dimensions.